3D printed architectural models in Dhaka
Updated
We print scale models for architecture students preparing studio and jury submissions, and for firms that need a quick massing or site model. White PLA reads as a clean, neutral model, the way form is usually presented.
What we print
- Massing models for comparing options early in a design
- Building models at 1:100 or 1:200
- Site and terrain models with stepped contours
- Urban block models at 1:500 or smaller, for context
- Detail pieces: a staircase, a facade section, a structural joint
Files and exports
Export your model as STL, OBJ or 3MF from Rhino, SketchUp, Revit or ArchiCAD. Upload it to Google Drive, Dropbox or WeTransfer and paste the link on the request form. Tell us the scale you want and the units the file is in, since an export in metres read as millimetres is the most common mistake. Close the geometry: open edges and loose surfaces do not print.
Scale and wall thickness
Real walls get very thin at model scale. A 250mm brick wall is 2.5mm at 1:100, 1.25mm at 1:200 and only 0.5mm at 1:500. As a rule, keep printed walls, columns and railings at least 1mm thick, and thicken anything thinner before you export. At 1:200, window mullions and railings are often better left out or modelled as solid panels.
Large models in parts
A big site or a tall tower is split into parts and joined. It helps to split it yourself along floor slabs, blocks or plot lines, so joints fall where the building already has a line. A separate base with the building set on top also makes the model easier to carry to a jury.
White, black and finishes
White is the usual choice. Black suits context buildings around a white proposal, or a dark site base. As printed shows fine horizontal lines, which on many buildings read like floor lines. Sanded gives a smoother, card-like surface, and sanded and painted lets you match a presentation colour scheme.
Deadlines and what drives the price
Quotes usually come back the same day and printing takes 2–3 days after you confirm, plus courier time, so send files well before a jury. Price is set by plastic and print time: solid massing blocks and large terrain bases cost more than hollow shells, and models printed in parts add hands-on time for joining. Orders start at ৳99. PLA softens around 55–60°C, so do not leave a finished model in a parked car.
Send your export link and the scale at krezit.cc/request.
Questions
- Can I get my studio model 3D printed in Dhaka before a jury?
- Yes. Krezit usually replies with a price the same day and prints in 2–3 days after you confirm, so send the file with a few days to spare for printing and courier.
- What file format should I send for an architectural model?
- STL, OBJ or 3MF exported from your modelling software, with closed geometry and known units. Tell us the scale as well, such as 1:100 or 1:200.
- How thin can walls be on a printed model?
- Keep walls, columns and railings at least 1mm thick at the printed scale. Thinner parts may snap or not print at all, so thicken them in the model before exporting.
- Can you print a large site model?
- Yes, it is printed in parts and joined. Splitting the model along roads, plots or floor slabs keeps the joints from showing.
